A 6-year warranty is given for Cisa chrome plated batteries and a 2-year warranty for electronic and technical products, provided that the approved warranty certificate or invoice is presented.

To the entrance of the installation, to the entrance of the sink and sink faucets. Intermediate tap with Cisa filter should be installed.

The inlet filter, intermediate taps with filter and flow regulator should be cleaned.

The surfaces of the battery should be wiped with soapy water and a soft cloth without using acid-containing cleaners.

The water in the installation should be drained by closing the main valve and opening all the taps.

As specified in the standards, the connection should be made with hot water on the left and cold water on the right. The distance between the axes should be 15 cm.

The packing group should be disassembled, the gasket should be renewed, and if the dripping does not stop, the gasket pressure surface on the body should be checked. If the thrust surface is of the nut (left tooth) type, the nut must be replaced. If the compression nut is not used, the entire body must be replaced.

City network water pressure should be 3-4 bar. If there is a higher pressure than this, Cisa water pressure regulators should be installed at the mains inlet with the help of a specialist plumber.

Cisa water pressure reducing regulator must be installed in front of the main valve.